GET PRE APPROVED IN MINUTES WITH OUR FINANCING PARTNERS!!!
Complete Vehicle News
When it comes to gymnastics, politics and truck bed cargo control-flexibility is key. And, there's no better way to touch your cargo-covering toes than with the Undercover Flex Tonneau Cover. Undercover's first folding tonneau features a sleek, low-profile design that folds away to reveal your entire truck bed.
Featuring 3 folding panels, the Flex cover folds completely forward and back to deliver full bed access and maximum security. The low-profile design sits flush with your truck's bedrails for a super sleek and slippery style that improves MPG, too. And, thanks to the simple clamp system, the Undercover Flex is easy to install and remove with no drilling required.
Crafted from a fiberglass reinforced polymer with a subtle textured finish, the Flex shoulders up to 400 lbs. And, it'll never crack, warp, fade, rust or corrode. Connected by seamless leak-proof rubber seals and featuring an integrated drain tube, the entire assembly keeps your bed clean, dry and secure. Best yet, Undercover backs your Flex Tonneau Cover with a 3-year warranty.
Whether you’re transporting a load of family furniture or loaded down with luggage, your costly cargo deserves the ultimate in open-road protection – the BAK BAKFlip MX4 Folding Tonneau. Easy to install in 30 - 45 minutes with no drilling required, the BAK MX4 looks like it was factory-installed. Manufactured from heavy-duty aluminum panels – with panel skins 1.5x thicker than the BAKFlip G2 – and enhanced with a dense foam core, this tri-fold tonneau cover combines functionality with durability. Not to mention, a UV- and scratch-resistant matte black finish for a super sharp look. Perhaps most impressive of all is its maximum weight rating of 400 evenly distributed lbs, so don’t worry about it caving in any time soon. Up or down, the BAK MX4 Tonneau offers full truck bed access thanks to a handily integrated tailgate seal and is equipped with long-lasting latch housing components. Thanks to sturdy prop rods on each side, you can even drive at safe highway speeds with the MX4 cover fully opened and positioned following the Safe Operation and Use guide included. The premium option in MX4’s aluminum series, your BAK BAKFlip Folding Tonneau Cover has a 3-year warranty.
- Take your payload protection to the next level with the BAK BAKFlip MX4 Folding Tonneau Cover
- Provides superior security with heavy-duty panels with an enhanced, premium-density foam core that are 1.5x thicker than the standard BAKFlip G2 Tonneau
- No-Profile design panels fold up in seconds, allowing 100% full bed access while the sturdy prop-rods on each side allow you to drive with the cover propped open at safe highway speeds
- When fully opened, your truck's rear window is covered and protected from cargo shifting forward during a sudden stop, and your 3rd brake light is still visible from behind on short- and standard-bed trucks
- Matte black finish offers unparalleled UV- and scratch-resistance – as well as long-lasting style
- Fortified with upgraded latch housing components for extended durability and resilience, and this truck bed cover locks when the tailgate is locked
- All new upgraded tailgate seal lets you close the tailgate with the cover up or down while helping keep the weather out
- Integrated buckle system secures cover in the folded position, perfect for 5th wheel towing or partial bed protection - no need for bungees or additional straps
- Higher weight rating than competing models – up to 400 lbs of evenly distributed weight can be supported
- Easy installation in 30 - 45 minutes using simple hand tools with no drilling required, plus your MX4 works with most bed extenders, under-the-rail bed liners, under-the rail toolboxes & storage units, sliding bed trays, bed rails and truck racks
- Add the BAKBox 2 Toolbox (sold seperately) to keep your gear organized
- Your BAKFlip MX4 Folding Truck Bed Cover carries a 3-year warranty
WeatherTech Floor Liners
Features
- WeatherTech Extreme-Duty DigitalFit Floor Liners offer floorboard protection against the elements
- Computer-designed and laser measured for a consistently custom fit
- Tray-style floor mat provides absolute coverage and even protects the front, back and sides of your vehicle's footwell
- Innovative design carries fluids and debris away from your feet and to a reservoir where they will not slosh around
- WeatherTech Extreme-Duty DigitalFit Floor Liners are available to protect your front row and rear row. Depending on your vehicle, the rear floor mat is a one or two piece design.
- Available in multiple colors to match or highlight any interior
- High-density, tri-extruded material remains flexible in extreme temperatures
- WeatherTech is proudly manufactured in the USA
- WeatherTech Extreme-Duty DigitalFit Floor Liners carry a Limited Lifetime Warranty against defects in material and workmanship
Call for vehicle specific price guide
Up to twice the skid resistance of other
drop in or spray on bedliners- Deep, rich UV protected finish that
means you don't have to sacrifice
appearance for real protection - Rib design guards against dents & scrapes
and allows water to drain away from the bed - Resists gasoline, oils and most chemicals
- Innovative features like molded-in board
holders for stacking and tailgate cupholders - Custom fit with no drill installation*
and tie down hole caps*
RetraxONE MX
Matte Polycarbonate Bed Cover
The RetraxONE MX retractable truck bed cover is part our Polycarbonate Series covers. The rigid polycarbonate construction provides superior impact resistance and ultimate UV protection allowing the cover to perform in temperatures from -50 to +200°F. The RetraxONE MX combines durable polycarbonate construction with an incredibly resilient matte finish. The matte finish on the RetraxONE MX provides incredible scratch resistance and adds style to your truck. Unlike our competition, the RetraxONE MX is manufactured out a single sheet of polycarbonate engineered to retract without joints, hinges, or moving mechanisms that can trap dust, wear out, or freeze creating a maintenance free truck bed cover. This truck bed cover features a patented low-profile design that streamlines the appearance while providing superior protection. The compact storage container features a unique spiral track system that prevents the cover from coming into contact with itself as it opens and closes The operation of this cover allows it to always stay flush to the rails which helps to create dependable seal and keep the elements out and protect your cargo. The RetraxONE MX has a sealed ball-bearing roller system that glides effortlessly along the rail with the convenient handle that eliminates the need for pull straps, Velcro, snaps or springs. The RetraxONE MX is key lockable any position that gives you unlimited flexibility in your hauling capacity.
trackmat
TrackMat is the perfect addition to your garage, pit or trailer. This knee-saving foldable mat is plush yet ultra-tough foam pad fused with 100% polypropylene fibers. Stain, oil and chemical resistant, it can withstand whatever you throw at it while effortlessly providing convenience and comfort. Made of a similar material to that used in lifejackets, it won’t retain water and can't mold or mildew. Use it as a pad to kneel on or as a lightweight and portable creeper to keep you comfortable and clean while working. Fold it down to its 2’ X 2’ size, throw it in your truck and the track experience has never been better.
-
2’ X 4’ Folding Mat
-
100% Polypropylene Fibers
-
¾" Closed Cell Foam
-
Impact Absorbing Cushion
-
Water and Stain Resistant
Premium LED Dome Lights (Application Specific)
- Make your car, truck, or SUV stand out with Putco's LED dome light replacements!
- Complete custom design to perfectly fit your vehicle's dome light housings.
- Requires no wiring knowledge - simply plug and play with the custom connector included with each light.
- The brightest dome light upgrade available - maximize the interior lighting in vehicle with Putco's Premium Dome Lights!
- Patent Pending
- When two or more Bulb Types are listed for the same application, remove the Bulb and check the numerical designation
Complete Vehicle, Inc.
12019 S. Spaulding School Drive
Plainfield, IL 60585
Phone: 800-634-0533
Fax: 815-254-8616
M-F 8:00am - 5:00pm
Sat 8:00am - 12:00pm
About Us
We are a proud member of the Plainfield Area Chamber Of Commerce.
